Machine Guard MG4-REF11A 5
SPM Instrument AB • Box 504 • SE-645 25 Strängnäs • Sweden
Technical data are subject to change without notice.
Tel +46 152 225 00 • Fax +46 152 15075 • info@spminstrument.se • www.spminstrument.com
ISO 9001:2000 certified © SPM 2017-09. 71947 B
Mechanical installation
The MG4-REF11A is designed for wall mounting. It is fastened with 4 screws, the screw hole di-
ameter is 4 mm.
If possible, do not mount the unit against vibrating machine parts. The max. continuous vibration
level should not exceed 5 mm RMS.
The casing material is polycarbonate/PVC, dimensions 200 x 144 x 77 mm. The casing is classed
IP65. The cable inlet M12 for vibration measuring cable is tight for cable diameters 3 to 6.5 mm.
The cable inlet Pg11 is tight for cable diameters 5.5 to 10 mm.
The temperature range of the MG4-REF11A is 0 to 50 °C (32 to 122 °F).
The maximum length of the transducer cables is 100 m for SPM shock pulse transducers type 42000.
To Next Page
Loading...
