Need help?Do you have a question about the SPM VibChecker and is the answer not in the manual?
General| Brand | SPM |
|---|---|
| Model | VibChecker |
| Category | Measuring Instruments |
| Language | English |
The instrument is intended for professional use only and requires proper handling to prevent injury or damage.
Explains the concept of proactive maintenance by monitoring machine health to prevent failures.
Details how vibration changes indicate machine condition and common fault causes.
Labels and describes the physical components of the VibChecker instrument.
Provides an overview of the VibChecker's purpose, design, and capabilities.
Illustrates and explains icons and information shown on the main screen.
Details the operation of the instrument's navigation keys for menu control.
Configures measurement parameters like ACC, VEL, DISP and units (Metric/Imperial, Hz/CPM).
Allows resetting to defaults and setting the instrument's date and time.
Lists the factory default values for various instrument settings.
Guides users on selecting metric or imperial units and frequency formats.
Step-by-step guide to reset the instrument to its factory default settings.
Instructions to find the instrument's hardware and software identification.
Connects and configures external IEPE/ICP type sensors for measurement.
Details the use of optional magnetic sensors for easy attachment.
Defines acceleration, velocity, and displacement as vibration measurement units.
Instructions on how to properly use the instrument's built-in probe.
Identifies optimal locations and directions for vibration measurements.
Describes the 'Overrange' error and its handling during measurement.
Guidance on using follow-up forms for tracking vibration trends.
Procedures for saving measurement data to memory locations.
How to access and review previously saved measurement results.
Instructions for clearing saved measurement data.
How to display and interpret the FFT spectrum of vibration data.
Explains how to zoom and pan within the spectrum display.
Guides on entering rotational speed (RPM) for spectral analysis.
How to add markers (1X, 2X, 3X) to identify harmonics in the spectrum.
How to display and interpret the raw vibration signal over time.
Explains how to zoom and pan within the time signal display.
Describes how to evaluate machine condition using ISO 2372 vibration limits.
Lists detailed technical data for the VibChecker models.
Information on optional accessories and replaceable parts.
Instructions for proper care and cleaning of the instrument.
Procedures for instrument calibration and understanding calibration reminders.
Details the limited warranty terms for the instrument.
To Next Page
