12
Display contrast and screensaver
timeout
To set the display contrast and the amount of idle time
that should elapse before the screensaver is activated:
1. Go to the Main display (A).
2. Use the arrow keys to navigate to the General Set-
tings icon (B), then press ENTER.
3. In the General Settings menu, select the Display
contrast icon (C) and press ENTER to open the dis-
play contrast and screensaver settings (D).
4. Use the UP/DOWN arrow keys to set the time to
wait (5 - 600 seconds) before the screensaver dims
the display backlight.
5. Use the LEFT/RIGHT arrow keys to set the display
contrast.
6. Press the ENTER key to save your settings and re-
turn to the General settings menu.
To return to the Main display, press the BACK key.
Date/time
It is essential that the instrument has the correct date
and time to avoid confusion when saving measuring
results to memory.
To set date and time:
1. Go to the Main display (A).
2. Use the arrow keys to navigate to the General Set-
tings icon (B), then press ENTER.
3. In the General settings display, select the Date and
time icon (C) and press ENTER.
4. In the Date and time display (D), use the LEFT/
RIGHT arrow keys to select positions and the UP/
DOWN arrow keys to change the setting.
5. Press ENTER to save the settings and return to the
General Settings display.
To return to the Main display, press the BACK key.
A
Main display
B
General settings
Display
contrast
C
D
A
Main display
B
General settings
C
D
To Next Page
Loading...
