32
Technical specifications
VibChecker VC200/250
Frequency range: 10 to 1000 Hz
Readings: RMS / peak / peak-to-peak
Measuring range, (sinus signal and 100 mV/g accelerometer):
Velocity RMS 100 mm/s (4 ips) at 80 Hz
Acceleration RMS 100 m/s
2
(10 g) at 10-1000 Hz
Displacement RMS 100 um (4 mil) at 80 Hz
Condition evaluation: according to ISO2372 and ISO10816 Part 2, 3, 4 >600 RPM
Spectrum: linear, 200/400/800 lines, Hanning window, Hz/cpm, zoom, RPM markers
Time signal: 512/1024/2048 samples, zoom, marker
General functions: battery status, bias check, metric or imperial units, language independent menus,
storage of up to 10 measuring samples
Condition indication: green, yellow and red symbols
Display: 2.4” Color TFT LCD display, LED backlight
Keypad: sealed, snap action
Material, casing: copolyester/TPE
Power supply: 3.63 V Lithium Ion, USB rechargeable
Battery life: > 25 hours of typical use
Built-in sensor: accelerometer type MEMS
Input connector: mini coax, for external sensor
External sensors: vibration transducer TRM100/ TRM120 or IEPE (ICP
®
) type transducers with voltage
output
Output connector: mini-B USB
Operating temperature: –10 °C to +50 °C (14 °F to 122 °F)
Dimensions: VC200: 207x74x41 mm (8.1x2.9x1.6 in)
VC250: 184x74x41 mm (7.2 x2.9 x1.6 in)
Weight: VC200: 335 g (11.8 ounces)
VC250: 300 g (10.6 ounces)
Accessories
TRM100 External sensor with integral magnet, straight,
1.5 m
TRM120 External sensor with integral magnet, angled,
1.5 m
93363 Cable adapter, mini coax - BNC
93062 Cable adapter, BNC - TNC, plug-jack
CAB52 Measuring cable, 1.5 m, mini coax- BNC slip-on
Spare parts
18128 Rubber sleeve for probe tip, chloroprene,
maximum 110 °C (230 °F)
TRM100
TRM120
To Next Page
Loading...
