SPM VibChecker - Instrument Reset and Information; Factory Reset Procedure; Serial Number and Software Version

16
Reset
To perform an instrument reset back to factory settings:
1. Go to the Main display (A).
2. Use the arrow keys to navigate to the General Set-
tings menu (B), then press ENTER.
3. In the General settings display, select the Reset
icon (C) and press ENTER.
4. The Reset display opens (D). Press ENTER to confirm
instrument reset. A green checkmark is displayed,
indicating that the reset has been done.
To return to the Main display, press the BACK key.
Pressing the ENTER key will reset the instrument back
to the default settings listed on page 11.
Serial number and software version
To find out the software version and instrument serial
number:
1. Go to the Main display (A).
2. Use the arrow keys to navigate to the General Set-
tings menu (B), then press ENTER.
3. In the General settings display, select the Informa-
tion icon (C) and press ENTER.
4. The Information display opens (D), showing the
software version and serial number.
To return to the Main display, press the BACK key twice.
A
Main display
B
General settings
C
Information
D
A
Main display
B
General settings
C
Reset
D