What to do if Sporlan Controller pressure transducers are not installed tightly?
If the Sporlan Controller's pressure transducers aren't installed tightly enough to depress the valve stem in the fitting, it can lead to inaccurate pressure readings and potential leaks. Ensure proper installation to avoid these issues.
How to test accuracy of Sporlan Superheat transducer?
To check the accuracy of the transducer in your Sporlan Controller, use a gauge set to determine the actual system pressure and compare it to the transducer's reading.
How to test transducer cable on Sporlan Superheat Controller?
To test the transducer cable of your Sporlan Controller, disconnect it from the transducer and check for 4.8 - 5.2 volts between the + and – terminals.
How to test Sporlan Superheat pressure transducers?
When testing Sporlan Controller pressure transducers, do so while they are connected to the controller and powered. At the controller terminals, voltage between terminals 34 and 35 should be 4.8 - 5.2 volts DC, and voltage between 33 and 34 should be between 0.5 and 4.5 volts DC.
Why Sporlan Controller sensors trigger an alarm?
When Sporlan Controller sensors fail and trigger an alarm, an alarm code will indicate which sensor is mis-wired, disconnected, or faulty. The alarm will continue until the problem is resolved.
Lists key capabilities and functionalities of the Sporlan Superheat Control.
Lists necessary tools for properly installing the controller unit.
Guide for initial setup of the controller with its integrated display.
Setup instructions for controllers that do not have an integrated display.
Procedure to reset all controller setpoints back to their factory default values.
Specific operational guidance for using the controller in refrigeration applications.
Guidelines for applying the controller to HVAC systems like chillers and AC units.
Explains specific operational features such as Pumpdown and Manual Valve Positioning.
Instructions for connecting and managing multiple controllers via the display networking feature.
Technical specifications and requirements for establishing RS-485 network connections.
General advice and steps for diagnosing and resolving system issues.
Troubleshooting specific issues related to temperature and pressure sensors.
Information on interpreting controller alarms and the actions to take.
General| Brand | Sporlan |
|---|---|
| Model | Superheat |
| Category | Controller |
| Language | English |
To Next Page
