Need help?Do you have a question about the Spraying Systems Co TeeJet 844-E and is the answer not in the manual?
Step-by-step instructions for installing and programming the sprayer control system.
Highlights essential features like backlit display, color-coded tips, and communication ports.
Details mounting and operation of the pressure regulator in bypass and throttling modes.
Guidelines for mounting flow meter and pressure transducer for accurate readings.
Instructions for connecting boom control valves and referring to their specific manuals.
Lists components and guides on mounting speed sensors (magnetic, proximity, radar) on wheels.
Guidance on selecting the best location and securely mounting the control console.
Details pin assignments and wire colors for console, power, and speed sensor connectors.
Provides essential tips and initial steps for the programming process.
Configures measurement units, resets defaults, and selects sensor type (flow meter/pressure transducer).
Guides on calibrating the flow meter by entering its factory pulse rate.
Enters nozzle spacing and number of tips per boom section for accurate calculations.
Defines how the pressure regulating valve is plumbed (bypass or throttling).
Specifies whether 2-way or 3-way boom control valves are used.
Covers automatic and manual calibration for speed sensors (magnetic, proximity, radar).
Utility features for measuring distance and testing console functions without spraying.
Sets the desired application rate in various units (GPA, G/1000 ft², l/ha).
Adjusts speed/pressure to diagnose application rate issues and determine correct nozzle size.
Explains how to incorporate programmed specific gravity into calculations.
Pre-operation checks of connections, sensors, tips, and system settings.
Details how to perform the actual spraying operation using the console controls.
Explains features for on-the-go rate adjustment, area/volume tracking, and flow rate display.
Describes alarm conditions for application rate discrepancies and lack of flow.
Addresses issues with application rate units flashing, relating to programming or components.
Troubleshoots problems with the flow meter turbine symbol flashing, stalled meter, or incorrect pulses.
Provides methods to calibrate the flow meter using known volume or known tip size.
General| Brand | Spraying Systems Co |
|---|---|
| Model | TeeJet 844-E |
| Category | Control Systems |
| Language | English |
To Next Page
