To Next PageTo Next Page
Need help?Do you have a question about the SprayTECH 1420 and is the answer not in the manual?
General| Model | 1420 |
|---|---|
| Spray Pattern Control | Adjustable |
| Max Pressure (PSI) | 3000 |
| Hose Length (ft) | 25 |
| Power Source | Electric |
| Max Pressure | 3000 PSI |
| Voltage | 120V |
| Hose Length | 25 ft |
| Nozzle Size | 0.015 inches |
Specific risks and prevention measures for injection injuries.
Risks associated with flammable vapors, ignition sources, and static electricity.
Health risks from inhaling or contacting paints and solvents.
Risks from mixing certain chemicals with sprayer components.
Broad safety advice, including equipment handling, ventilation, and personal protection.
Requirements for proper electrical grounding of the equipment.
Guidelines for using extension cords, voltage, and power connections.
Lists parts included in the shipping carton and identifies key components.
Explains the operation of switches, knobs, and dials on the sprayer.
Details sprayer models, capacities, power requirements, and capabilities.
Visual guides to the sprayer and spray gun components.
Cross-references sprayer models with gun models, tips, and hose lengths.
Lists necessary tools for assembling the sprayer.
Step-by-step instructions for assembling the cart models.
How to lock the spray gun trigger for safety during maintenance.
Steps for connecting the sprayer to a power source.
Critical procedure for safely releasing pressure in the spray hose.
How to remove test fluid and prime the pump for first use.
Procedure for flushing the spray hose with paint or cleaning solution.
Steps for initial spraying and pattern checking.
Advice on gun angle, distance, and stroke for uniform coverage.
Steps to clear obstructions from the spray tip for optimal performance.
Procedures for cleaning the filter located inside the spray gun.
Procedures for cleaning the filter on the suction tube.
General advice and precautions before cleaning the equipment.
Detailed steps for cleaning the sprayer using water and latex materials.
Continuation of latex cleaning, focusing on flushing the system with water.
Detailed steps for cleaning the sprayer using mineral spirits and oil-based materials.
Procedures for cleaning the suction set components.
Steps to clean the spray gun parts like filter, tip, and guard.
Steps to prepare the unit for short-term storage (up to 16 hours).
Steps to resume operation after short-term storage.
Procedures for preparing the sprayer for extended periods of non-use.
How to fold the cart handle for easier storage.
Steps to clean and service the pump's inlet valve assembly.
Detailed instructions for disassembling and replacing fluid section seals.
Solutions for common sprayer problems like starting issues or pressure loss.
Routine cleaning and recommended service intervals for longevity.
Lists and illustrates parts for the GX-05 spray gun model.
Lists and illustrates parts for the GX-07 spray gun model.
Lists and illustrates parts for the GX-08 spray gun model.
Lists and illustrates parts for the suction set assembly.
Lists and illustrates parts for the cart and stand assemblies.
Lists optional accessories that can enhance sprayer functionality.
Outlines the limited warranty terms, coverage, and exclusions for the equipment.
