To Next PageTo Next Page
Need help?Do you have a question about the SprayTECH 1920 and is the answer not in the manual?
Prevention of serious injury from high-pressure fluid injection.
Prevention of ignition from flammable vapors and static electricity.
Protection against harmful paint and solvent vapors.
Avoiding dangerous reactions with specific chemicals.
Preventing severe injury or property damage from general hazards.
Ensuring proper electrical grounding and safe power connections.
Information on thermal overload and fuses for unit protection.
Listing and identification of parts included in the shipping carton.
Explanation of the sprayer's switches, knobs, and their operations.
Key technical details like capacity, power source, and generator requirements.
Overview of materials the sprayer can handle and limitations.
Details on different spray gun models, tips, and their applications.
List of required tools for setting up the sprayer.
Step-by-step guide for putting the sprayer together.
How to safely lock the spray gun trigger when not in use.
Correct procedure for connecting the sprayer to a power source.
Method for safely releasing pressure from the spray hose.
Steps to remove test fluid and prepare the sprayer for first use.
Procedure for flushing the spray hose and gun before use.
Tips for proper spray gun movement and trigger control.
Steps to restore spray pattern when the tip is blocked.
Procedure for cleaning the filter inside the spray gun.
Procedure for cleaning the filter on the suction tube.
Key points to follow before and during sprayer cleaning.
Step-by-step guide for cleaning with water and garden hose.
Steps for cleaning with mineral spirits.
Procedure for disassembling and cleaning the suction set.
Detailed steps for cleaning the spray gun parts.
Steps to prepare the sprayer for short-term storage.
Steps to resume operation after short-term storage.
Instructions for preparing the sprayer for extended storage.
Procedure for cleaning and servicing the inlet valve.
Steps to take the fluid section apart for seal replacement.
Steps to reassemble the fluid section with new seals.
Diagnosing and resolving issues when the sprayer won't power on.
Troubleshooting problems with the sprayer not drawing paint.
Resolving issues where pressure decreases when the gun is triggered.
Addressing problems with the PRIME/SPRAY valve operation.
Identifying and fixing leaks from the spray gun.
Addressing leaks from the tip guard assembly.
Troubleshooting when the spray gun fails to dispense material.
Correcting issues with the spray pattern having tails.
Recommended routine checks and cleaning after each use.
Information on replacing pump parts and available repair kits.
List of components for the GX-05 spray gun.
List of components for the GX-07 spray gun.
List of components for the GX-08 spray gun.
List of components for the suction set assembly.
List of components for stand and cart assemblies.
List of optional accessories and their part numbers.
Details on the product warranty coverage and terms.
General| Brand | SprayTECH |
|---|---|
| Model | 1920 |
| Category | Paint Sprayer |
| Language | English |
