To Next PageTo Next Page
Need help?Do you have a question about the SprayTECH 1620 and is the answer not in the manual?
General| Brand | SprayTECH |
|---|---|
| Model | 1620 |
| Category | Paint Sprayer |
| Language | English |
High-pressure fluid injection risk, potential for amputation. Seek immediate medical attention.
Flammable vapors can ignite. Avoid ignition sources, ensure ventilation, use grounded equipment.
Inhaling or skin contact with paints/solvents can be harmful. Use protective gear.
Avoid bleach, chlorine, or halogenated solvents with aluminum components.
Read instructions, follow codes, use authorized parts, inspect hoses, secure parts.
Proper grounding is essential for electrical safety to prevent shock.
Use heavy-duty, 3-wire grounded extension cords suitable for outdoor use if needed.
Lists all parts included in the shipping carton.
Explains the purpose and operation of each control and function.
Details capacity, power source, generator requirement, and capability.
Lists the necessary tools for assembling the sprayer.
Detailed step-by-step instructions for assembling the unit.
Instructions on how to safely lock the spray gun trigger.
Steps for safely connecting the sprayer to a power outlet.
Procedure to release pressure from the hose before shutdown.
Steps to remove test fluid and prepare the sprayer for use.
Detailed steps for purging and priming the spray hose.
Guidance on proper technique for an even coating and good spray pattern.
Steps to clear obstructions from the spray tip.
Instructions for cleaning the filter inside the spray gun.
Instructions for cleaning the filter on the suction tube.
General notes and precautions before starting cleanup.
Step-by-step guide for cleaning the sprayer after using latex paint.
Step-by-step guide for cleaning the sprayer after using oil-based paint.
Instructions for cleaning the suction set and its components.
Instructions for cleaning individual components of the spray gun.
Steps to properly shut down the sprayer for storage up to 16 hours.
Steps to prepare the sprayer for use after short-term storage.
Instructions for preparing the sprayer for extended storage.
Procedure for cleaning the inlet valve assembly.
Steps for disassembling the fluid section of the pump.
Steps for reassembling the fluid section with new seals.
Lists common issues and their solutions.
Recommended daily maintenance procedures for the sprayer.
Information on extended maintenance and available repair kits.
Details the limited warranty for the airless paint sprayer equipment.
Outlines what the warranty does and does not cover.
