To Next PageTo Next Page
Need help?Do you have a question about the SprayTECH 1720 and is the answer not in the manual?
Details risks and prevention of high-pressure injection injuries from the spray stream.
Covers risks and prevention related to flammable vapors, ignition sources, and static electricity.
Information on the dangers of inhaling paint and solvent vapors and necessary precautions.
Warning about using materials with aluminum components that can cause damage or injury.
Essential safety rules and practices to follow during operation and maintenance.
Proper grounding procedures to prevent electric shock and ensure equipment safety.
Guidelines for using extension cords and understanding electrical requirements for the sprayer.
Details the parts included in the shipping carton and their function.
Explains the purpose and operation of the sprayer's controls and features.
Lists model specifications, power requirements, and key safety features of the sprayer.
Provides a chart matching sprayer models with gun models, tip sizes, and recommended gun filters.
Step-by-step guide for assembling the sprayer's cart models.
Covers essential pre-operation checks: locking the gun, plugging in, and pressure relief.
Procedure to remove test fluid or cleaning solutions from the sprayer's fluid section.
Steps to flush the spray hose with cleaning fluid to remove air or debris.
Tips and techniques for proper spray gun handling to ensure an even coating.
Instructions for clearing obstructions from the spray tip to restore spray pattern.
Procedure for cleaning or replacing the filter located in the spray gun.
Instructions for cleaning the filter located at the bottom of the suction tube.
General guidelines and precautions before performing cleaning tasks.
Detailed steps for cleaning the sprayer after use with latex materials.
Detailed steps for cleaning the sprayer after use with oil-based materials and solvent.
Procedure for cleaning the suction hose, return tube, and inlet filter assembly.
Steps for cleaning the spray gun's internal parts like the filter, tip, washer, and seat.
Instructions for preparing the sprayer for short-term storage, including shutdown and startup.
Detailed steps for preparing the sprayer for extended periods of non-use.
Procedure for cleaning the inlet valve assembly to resolve priming issues.
Instructions for disassembling and reassembling the fluid section for seal replacement.
Guide to diagnosing and resolving common operational problems with solutions provided.
Information on daily maintenance, extended maintenance, and available repair kits.
Diagram and list of replacement parts for the GX-05 spray gun.
Diagram and list of replacement parts for the GX-07 spray gun.
Diagram and list of replacement parts for the GX-08 spray gun.
Diagram and list of parts for the suction set, including tubes and filters.
Diagram and list of parts for cart and stand assemblies and related components.
List of optional accessories, their part numbers, and descriptions for purchase.
Outlines the terms, conditions, and duration of the product's limited warranty.
General| Brand | SprayTECH |
|---|---|
| Model | 1720 |
| Category | Paint Sprayer |
| Language | English |
