18
English
Follow these steps when using latex materials only. If using materials that are oil-based, follow the Cleanup and Long-
Term Storage steps.
Shutdown
1. Lock the spray gun off.
2. Turn the PRIME/SPRAY knob to PRIME. Switch the pump
OFF
(O). Unplug the sprayer.
3. Pour 1/2 cup water slowly on the top of the paint to
prevent the paint from drying. Wrap the spray gun
assembly in a damp cloth and place it in a plastic bag.
Seal the bag shut. Place the sprayer in a safe place out
of the sun for short-term storage.
Startup
1.
Remove the gun from the plastic bag. Stir the water into
the paint.
2. Turn the PRIME/SPRAY knob to PRIME. Plug sprayer in.
Turn the switch to ON
(I).
3. Turn the PRIME/SPRAY knob to SPRAY. Test the
sprayer on a practice piece and begin spraying.
Short-Term Storage (up to 16 hours)
To Next Page
Loading...
