19
English
Long-Term Storage
1. Fill a cup or other container with separating oil
(approximately 2 ounces) supplied with the unit and
s
ubmerge the inlet valve into the oil.
2. Place a rag over the spray hose port, and turn the switch
ON
(l). When the oil has been sucked from the cup, turn
the pump OFF (O).
3. Wipe the entire unit, hose and gun with a damp cloth to
remove accumulated paint. Replace the high pressure
hose to the paint hose port.
If you have a cart model (1620, 1720, 1920), you can collapse the cart handle for easier storage.
1. Twist the knobs on either side
of the cart counterclockwise.
2. Slide the handle into the cart.
Separating oil
Follow these instructions only after all cleanup steps have been performed.
To Next Page
Loading...
