Welcome!
Thank you for purchasing the Wireless Forecast Station, designed for
years of trouble-free performance. This manual provides easy set up
and programming instructions for you to review.
Get Started
1. Insert 2 new AA, Alkaline batteries
into the TX141-Bv2 sensor.
LED
TX Button
AA
AA
2. Insert 2 new AA, Alkaline batteries into the station. Observe the
correct polarity.
3. Allow sensor and station to remain 5-10 feet apart for 5 minutes
to lock in the signal.
4. After 5 minutes place sensor outside in a shaded location.
AA
AA
• Mount the Outdoor Sensor on a north-facing wall or in any
well shaded area. Under an eave or deck rail is preferred.
• The maximum wireless transmission range to the forecast
station is over 300 feet (91 meters) in open air, not including
walls or oors.
• Be sure the outdoor sensor is mounted vertically.
Position Outdoor Sensor
CA86514 Page | 1
To Next Page
Loading...
