Sprout Nomad Alpha - Product Overview

CONNECTING MULTIPLE SPEAKERS
VIA UNISYNC
TM
If you are using the UNISYNC feature you can
connect one Nomad Alpha as a primary, then
connect up to 50 UNISYNC compatible devices
as replicas.
To connect a replica, shor press the UNISYNC
buton on your primary device once to enter
UNISYNC mode. Once the primary announces it
is in UNISYNC mode, repeat on the replica. Afer
the replica announces it is in UNISYNC mode,
press the UNISYNC buton once more – the
replica should now announce it is using UNISYNC
audio. The primary speaker will show a solid blue
light while replicas will show a flashing red and
blue light.
Press the UNISYNC buton again to disable
UNISYNC.* Press and hold the UNISYNC buton for
five seconds to reset the UNISYNC function.**
*If UNISYNC is disabled, Nomad Alpha will disconnect from
but remember the replicas connected to it.
**Reseting UNISYNC will enable Nomad Alpha to ‘forget’ all
replica devices.
WIRELESS CHARGING
The wireless charging pad conveniently recharge
your Qi-compatible devices. The main power
switch must be turned on to use this feature.
4. OPERATING CONTROLS 4. OPERATING CONTROLS
MAIN POWER SWITCH
The main power switch must be set to the ‘ON’ position
for Nomad Alpha to be operational. The power standby
function will only work when the main power switch is in the
‘ON’ position.
POWER
Press the power buton to turn on or of. When turned of,
Nomad Alpha remains in standby power mode. Please note
that the main power switch at the side panel needs to be
switched to on for the power buton to operate.
PLAYPAUSEANSWER
Press the play/pause/answer buton to play or pause songs
and answer mobile phone calls.
VOLUME CONTROL
Shor press ‘-’ buton to decrease volume.
Shor press ‘+’ buton to increase volume.
TRACK CONTROL
Long press ‘-’ buton to select previous song.
Long press ‘+’ buton to select nex song.
LED FLASHLIGHT
Hold the LED flashlight buton for 5 seconds to
turn on or of. Continue pressing the buton to cycle
through the available flashlight modes. Normal
brightness, highlights, slow flash, quick flash.
WARNING: In about 5% of people with epilepsy, exposure to
flashing or flickering lights can trigger seizures (Source: Epilepsy
action Australia). The strobe light function in this device may
potentially trigger seizures for people with photosensitive
epilepsy. User discretion is advised.
76