Need help?Do you have a question about the SPRT SP-POS894 and is the answer not in the manual?
Class A product warning about potential domestic radio interference, requiring adequate measures.
Details print method, paper width, density, speed, and reliability (head/cutter life).
Specifies thermal paper roll model, type, dimensions, and thickness.
Details ANK and GB character set font sizes and dimensions.
Lists Ethernet, USB, and Cash Drawer control interfaces.
Covers character and graphics print commands, including barcode support.
Specifies power requirements (DC24V±10%, 2A) and socket type.
Defines operational and storage temperature and humidity ranges.
Provides the physical dimensions of the printer.
Lists printer models with their interfaces and max print speed.
Refers to a diagram for printer part names.
Details the steps for loading thermal paper.
Provides step-by-step instructions for loading paper.
Offers solutions for cutter and paper jams, including manual intervention.
Introduces the printer's interface options.
Describes the Ethernet interface and RJ45 socket.
Details the USB interface, cable, and pin description.
Explains the cash drawer interface using an RJ-11 socket.
Details the power connection using an external adapter and socket type.
Explains the FEED button, buzzer, and POWER, PAPER, ERROR indicators.
Details non-recoverable, recoverable, and auto-recoverable errors with LED flickering types.
Describes the printer's status indicators upon power-on.
Explains how to perform a self-test and what information it provides.
Details how to enter and exit hexadecimal printing mode.
Explains methods for setting printer parameters via PC tool or button.
Provides instructions for entering program upgrade mode.
Outlines the general setting procedure using buttons for baud rate, language, font, etc.
Details how to set print speed using the FEED button.
Explains how to configure buzzer settings (OFF, Error ON, Cut ON, ALL ON).
Describes how to enable or disable paper-out reprint functionality.
Explains how to set the printer for black mark mode (close/open).
General| Type | Thermal Printer |
|---|---|
| Printing Method | Direct Thermal |
| Print Width | 72 mm |
| Resolution | 203 dpi |
| Connectivity | USB, Serial, Ethernet |
| Paper Type | Thermal Paper |
| Paper Width | 80 mm |
| Power | DC 24V/2.5A |
| Auto Cutter | Yes |
| Paper Thickness | 0.06 to 0.08 mm |
| Power Consumption | 60W |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | 60°C |
| Humidity | 10 to 80% RH |
| Paper Roll Diameter | 83mm |
To Next Page
