Need help?Do you have a question about the SPRT SP-POS892 and is the answer not in the manual?
Details print method, width, density, speed, and reliability metrics for the printer.
Specifies paper models, type, dimensions, and thickness requirements for thermal paper rolls.
Lists character sets (ANK, GB) and their respective font sizes and dimensions.
Describes the RS-232C serial, Ethernet, and USB interfaces available on the printer.
Details commands for character, graphics, barcode printing, and density adjustments.
Specifies the printer's power requirements, voltage, current, and socket type.
Lists the recommended operating and storage temperature and humidity ranges.
Provides the physical dimensions (Length, Width, Height) of the printer unit.
Table showing different printer models with their interface types and maximum print speeds.
Diagram and labels identifying key parts of the printer exterior.
Instructions for loading thermal paper and procedures to resolve paper jams.
Details the RS-232C serial interface, including pinout and communication protocols.
Describes the standard Ethernet interface using an RJ45 network socket.
Details the USB interface, Mini-USB cable, and pin descriptions.
Describes the cash drawer interface using an RJ-11 6-pin socket and its pin assignment.
Details the external power supply adapter, socket type, and pin assignment.
Explains the function of the FEED button, buzzer, and various LED indicators.
Describes the printer's status indicators and their behavior upon power-on.
Explains how to perform a self-test and the information it provides.
Instructions to enter and exit the hexadecimal dump printing mode.
Describes two methods for setting printer parameters via PC tool or button operation.
Instructions for entering the firmware upgrade mode for the printer.
Details the method for setting printer parameters using button operations and feedback.
To Next Page
General
