SPRT SP-TL51 - 1.4 Interface; 1.5 Print Control Commands

2
Label PaperThickness ---------- 0.12mm～0.20mm(label length≥3cm, gap≥2mm)
● Paper type: Normal thermal paper, label paper, black sense paper.
1.3 Print Font
● ANK Character Set:
12*24 dot, 1.5(W)*3.00(H)mm, 9*17dot, 1.125(W)*2.125(H)mm
● Chinese characters:
24*24dot, 3.00(W)*3.00(H)mm
1.4 Interface
●RS
－
232CSerial Interface:
DB-25 socket (female), DB-9 socket (female), support XON/XOFF and DTR/DSR protocols.
Baud rate: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200bps adjustable.
Data structure: 1start bit + (7 or 8) data bits + 1 stop bit.
Parity checking: no parity or odd, even parity optional.
●Parallel Interface:
36-pin, 8-bit parallel interface, BUSY/ACK handshaking protocol, TTL signal level.
●Ethernet Interface: Standard Ethernet interface.
●USB interface: Standard USB interface.
1.5 Print Control Commands
●Character print commands: support double-width, double height printing of ANK characters,
self-defined characters, and Chinese characters, the character line spacing is adjustable.
●Graphics print commands: support print of bit-map graphics and download bit-map graphics
with different density.
●GS bar code print commands: support printing UPC-A, UPC-E, EAN-13, EAN-8, CODE39,
ITF25, CODABAR, CODE93, CODE128, PDF417, QR Code, and DATA Matrix.