SPT SD-9239SS - Wash Cycle Table; Error Codes

WASH CYCLE TABLE
4
Detergent
pre/main
Detergent
pre/main
Cycle Selection
Information
Cycle Selection
Information
Light
ProgramProgram
Heavy
Normal
Running
time(min)
Running
time(min)
Water
(gal)
Water
(gal)
Energy
(Kwh)
Energy
(Kwh)
Rinse
Aid
Rinse
Aid
18g
18g
18g
For normally soiled loads,
such as pots, plates,glasses
and lightly soiled pans.
standard daily cycle.
For lightly soiled loads,such
as plates,glasses,bowls and
lightly soiled pans.
For the heaviest soiled
loads, such as pots, pans,
casserole dishes and dishes
that have been sitting with
dried food on them for a
while.
A shorter wash for lightly
soiled loads .
Speed
Pre-wash
Pre-wash (122 )
Wash (136 )
Rinse
Rinse (149 )
Drying
°F
°F
°F
Pre-wash
Wash (136 )
Rinse
Rinse (149 )
Drying
°F
°F
Pre-wash
Wash (122°F)
Rinse
Rinse (140°F)
Drying
Pre-Wash
Wash (122°F)
Rinse (131°F)
Drying
18g.
115
100
130
65
4.6
3.65
3.67
2.75
Description
of Cycle
Description
of Cycle
For dishes that just need a
quick rinse.
25
1.9
3.7
135
All in 1
Rinse
For all soiled loads, such as
pots,pans,casserole dishes
and dishes that have been
sitting with dried food on them
for a while.
Pre-wash
Pre-wash
wash 136°F
Rinse 154°F
Drying.
Codes
Meanings
Possible Causes
Long inlet time.
Faucets is not opened, or water intake is restricted,
or water pressure is too low.
E1
Malfunction of temperature sensor or of heating element.
Long heating time,
unit not reaching the required temperature
E3
ERROR CODES
When unit experiences malfunction, the appliance will display error codes
(AHAM)
Pre-Wash
Pre-Wash