To Next PageTo Next Page
Need help?Do you have a question about the SPX Hankinson HHL-115 and is the answer not in the manual?
General| Model | HHL-115 |
|---|---|
| Manufacturer | SPX Hankinson |
| Maximum Flow Rate | 115 scfm |
| Connection Size | 1" NPT |
| Category | Dryer |
| Type | Heatless |
| Operating Pressure | 100 psig |
| Dew Point | -40°F |
Introduction to the HHE, HHL, HHS series of pressure-swing desiccant air dryers.
Safety precautions related to the equipment being a pressure-containing device.
Guidelines for electrical connections and safety during service.
Information on air quality suitability and noise level warnings.
Guidelines for locating the dryer and ensuring air quality.
Specification for the maximum allowable operating pressure.
Specifies the minimum required operating pressures for the dryer.
Overview of controller types, features, and comparisons.
Details on input power, alarm, remote, and communication connections.
Explanation of jumper settings for pressure, alarm, and service intervals.
Details on input power, alarm, remote, and communication connections.
Information on handling alarm and service messages.
Steps for initial dryer start-up including controller settings and pressurization.
Regular checks for indicators, pressure, alarms, and valves.
Procedures for safely shutting down the dryer and power loss.
Guidelines and procedures for desiccant replacement.
Lists common dryer symptoms, possible causes, and corrective actions.
