To Next PageTo Next Page
Need help?Do you have a question about the SPX Hankinson HHS-1550 and is the answer not in the manual?
General| Model | HHS-1550 |
|---|---|
| Nominal Capacity | 1550 SCFM |
| Inlet Temperature | 100°F |
| Pressure Dew Point | -40 °F |
| Type | Heatless Regenerative |
Precautions for pressure-containing equipment.
Guidelines for safe electrical operation and servicing.
Information on air suitability for breathing and relevant standards.
Explains dryer operation and the Automatic Purge Saving System.
Recommendations for optimal dryer placement and inlet air conditions.
Information on minimum/maximum operating pressures and temperatures.
Introduction to dryer controller levels and features.
Steps for initial dryer start-up, including controller settings.
Procedures for pressurizing, energizing, and setting purge pressure.
Regular checks for power, moisture indicator, pressure, and alarms.
Checking if the dryer operates within specified parameters.
Instructions and frequency for replacing desiccant material.
Identifying causes for premature desiccant saturation and tower repressurization problems.
