16
Lower Leg Seal Service
Soak new foam rings in RockShox® suspension oil.
Install the new foam rings into the lower leg.
Remove the outer wire spring from each new dust wiper seal and set
them aside.
Insert the narrow end of a new wiper seal into the recessed end of the
32 mm Flangeless Dust Seal Installation tool.
NOTICE
If the RockShox x Abbey Bike Tools™ installation tool is used, confirm
the 32 mm installation puck is tightened hand tight on the installation
tool handle to avoid damage to the installation puck during use.
4
To Next Page
Loading...
Need help?
General
