SRAM RockShox SEKTOR User Manual

24
Air Spring Travel Change and Bottomless Tokens™ (optional)
Air Spring Travel Change and Bottomless Tokens™ (optional)
To increase or decrease the travel in your RockShox® Sektor™, an All-Travel spacer can be installed or removed. For example, to increase travel from a
maximum of 130 mm of travel to a maximum of 150 mm of travel, the 20 mm All-Travel spacer must be removed from the air spring assembly. If travel
is changed from 80 mm, 100 mm, or 120mm to 130 mm, 140 mm, or 150 mm, and vice versa, the air spring must be replaced with the appropriate
length air spring assembly in addition to the appropriate length All-Travel spacer. Use the table and images below to determine which All-Travel
spacer and air spring assembly can be used with each fork travel option.
Bottomless Tokens can be added to, or removed from, the DebonAir™ top cap to fine-tune the spring curve and bottom out feel. Use the table below
to help determine the number of Bottomless Tokens that can be used with each fork travel option. If fork travel is changed from stock, it may be
necessary to add or remove Bottomless Tokens.
Refer to the RockShox Spare Parts Catalog at www.sram.com/service for available air spring, All-Travel spacer, and Bottomless Token kits.
For part ordering information, please contact your local SRAM® distributor or dealer.
DebonAir - Travel and Bottomless Token Tuning
27.5" Boost™ & 29" Boost
Fork Travel
(mm)
All-Travel Spacer
(mm)
Air Spring Assembly
(mm)
Bottomless Tokens
Factory Installed
Bottomless Tokens
Maximum
150 -
130 - 150
0 2
140 10
130 20
120 -
80 - 120100 20
80 40
Air Spring and All-Travel Spacer Configurations
27.5" Boost & 29" Boost
150 mm 140 mm 130 mm 120 mm 100 mm 80 mm
10 mm
20 mm
20 mm
40 mm

SRAM RockShox SEKTOR Specifications

General

Brand	SRAM
Model	RockShox SEKTOR
Category	Bicycle Accessories
Language	English