1110
www.sunnyrooproducts.com
Installation: Step by Step
Step 1. Fit the wall mounting bracket.
When marking the positions of the drill holes,
use the wall mounting bracket as a drilling
template.
Step 2. Hang the SR Series Inverter onto the wall mounting bracket using its
upper mounting plate. This ensures the inverter cannot be moved sideways.
Step 3. Check that the SR Series Inverter is positioned securely on the bracket.
Electrical Installation
The correct installation for the SR Series Inverter is shown in the following
diagram below (Fig. 1)
Fig. 1
To Next Page
Loading...