INTERIOR SWITCHES
4-11
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
CRUISE CONTROL SWITCH* (FOR AUTO T/M)
CRUISE CONTROL
The cruise control is an automatic speed control system that main-
tains a desired driving speed without using the accelerator pedal.
The vehicle speed must be greater than 36 km/h to engage the cruise
control. This feature is especially useful for motorway driving.
Setting a Desired Speed
1. To operate the cruise control, accelerate to your
desired speed using the accelerator pedal over 36
km/h.
2. When the desired speed is reached, push up the
ACCEL switch of the cruise control lever or push
down the DECEL switch for 1 second per one
switching and then release the accelerator pedal
slowly.
3. Now, the vehicle is cruised by this system with the
set speed.
4. And you can set to other vehicle speeds again with
above steps after an accelerator pedal intervention
during the cruise control running.
Improper use of the cruise control could be dangerous.
• Do not use on winding roads.
• Do not use in heavy traffic.
• Do not use on slippery, wet roads.
This could result in a loss of control, collision, and/or personal injuries.
CAUTION
04-Interior Switches.p65 2006-05-17, ¿ÀÈÄ 12:57Page 11 Adobe PageMaker 6.5K/Win
To Next Page
Loading...
Need help?
General
