ST STM32 NUCLEO-F072RB User Manual

August 2020 UM1724 Rev 14 1/68
1
UM1724
User manual
STM32 Nucleo-64 boards (MB1136)
Introduction
The STM32 Nucleo-64 boards based on the MB1136 reference board (NUCLEO-F030R8,
NUCLEO-F070RB, NUCLEO-F072RB, NUCLEO-F091RC, NUCLEO-F103RB,
NUCLEO-F302R8, NUCLEO-F303RE, NUC
LEO-F334R8, NUCLEO-F401RE,
NUCLEO-F410RB, NUCLEO-F411RE, NU
CLEO-F446RE, NUCLEO-L010RB,
NUCLEO-L053R8, NUCLEO-L073RZ, NUCLEO-L152RE
, NUCLEO-L452RE,
NUCLEO-L476RG
) provide an affordable and flexible way for users to try out new concepts
and build prototypes with the STM32 microcontrollers in the LQFP64 package, choosing
from the various combinations of performance, power consumption, and features. The
ARDUINO
®
Uno V3 connectivity support and the ST morpho headers provide an easy
means of expanding the functionality of the Nucleo open development platform with a wide
choice of specialized shields. The STM32 Nucleo boards do not require any separate probe
as they integrate the ST-LINK/V2-1 debugger and programmer. The STM32 Nucleo boards
come with the comprehensive free software libraries and examples available with the
STM32Cube MCU Packages, as well as direct access to the Arm
®
Mbed
™
online resources
at
http://mbed.org/ .
Figure 1. STM32 Nucleo-64 board
Picture is not contractual.
www.st.com

ST STM32 NUCLEO-F072RB Specifications

General

Microcontroller	STM32F072RBT6
Core	ARM Cortex-M0
Operating Voltage	3.3V
Input Voltage	7-12V
Operating Frequency	48 MHz
Flash Memory	128 KB
SRAM	16 KB
Analog Input Pins	16
ADC Channels	16
Debug Interface	ST-LINK/V2-1
Dimensions	69 mm x 53 mm
Communication Interfaces	I2C, SPI, USART
USB	USB 2.0 FS
Board Connectors	Arduino Uno R3, ST Morpho

Summary

Ordering information

Codification

Development environment

Development toolchains

Quick start

Getting started

Step-by-step guide to configure the board and launch demo software.

Hardware layout and configuration

Embedded ST-LINK/V2-1

Details the integrated ST-LINK/V2-1 debugger and programmer features.

Power supply and power selection

Covers various methods and considerations for powering the Nucleo board.

External power supply inputs: VIN and E5V

Specifies external power input options and their voltage/current ranges.

External power supply input: +3.3V

OSC clock

USART communication

Solder bridges

Lists all solder bridges and their functions for board configuration.

ARDUINO® connectors

Details pin assignments for ARDUINO Uno V3 connectors on various boards.

ST morpho connector

Details pin assignments for the ST morpho connectors on various boards.