ST STM32F413 Series - User Manual

October 2018 AN4488 Rev 7 1/50
AN4488
Application note
Getting started with STM32F4xxxx MCU hardware development
Introduction
This application note is intended for system designers who require an overview of the
hardware implementation of the development board, with focus on features like
• power supply
• package selection
• clock management
• reset control
• boot mode settings
• debug management.
This document shows how to use the high-density high-performance microcontrollers listed
in
Table 1, and describes the minimum hardware resources required to develop an
application based on those products.
Detailed reference design schematics are also contained in this document, together with
descriptions of the main components, interfaces and modes.
Table 1. Applicable products
Type Part numbers and Product lines
Microcontrollers
STM32F401xB / STM32F401xC
STM32F401xD / STM32F401xE
STM32F405/415 line
STM32F407/417 line
STM32F410x8 / STM32F410xB
STM32F411xC / STM32F411xE
STM32F412xE / STM32F412xG
STM32F413/423 line
STM32F427/437 line
STM32F429/439 line
STM32F446 line
STM32F469/479 line
www.st.com

Summary

Power Supplies

Digital Supply

Details the digital power supply, including voltage regulator modes and OFF mode.

Power Supply Schemes

Explains various power supply configurations and decoupling capacitor requirements.

Reset and Power Supply Supervisor

System Reset

Power Supply Supervisor

Details power-on/down reset, brownout reset, and PVD functionality.

Programmable Voltage Detector (PVD)

Explains PVD usage for monitoring VDD and generating interrupts.

Package

Package Selection

Boot Mode Selection

Debug Management

SWJ Debug Port (Serial Wire and JTAG)

Covers the integrated SWJ-DP, combining JTAG and SW debug modes.

Pinout and Debug Port Pins

Clocks

HSE OSC Clock

LSE OSC Clock

FAQ

MCU Does Not Work Properly

Troubleshooting common root causes for MCU not working.

ST STM32F413 Series Specifications