7.39 StartTemperatureUpdate
VL53L1X_ERROR VL53L1X_StartTemperatureUpdate(VL53L1_Dev_t dev);
This function performs the temperature calibration.
If the sensor has been stopped for a long time, it is recommended to perform the temperature update prior to
restarting the ranging.
By default, the sensor can adequately handle any temperature change as long as it is running, but if the sensor is
stopped for an extended period of time, a temperature compensation is advised.
UM2510
StartTemperatureUpdate
UM2510 - Rev 1
page 20/26
To Next Page
Loading...
