ST X-NUCLEO-GNSS1A1

Setup & demo examples
HW prerequisites
6
• 1 x STM32 Nucleo GNSS expansion board (X-NUCLEO-GNSS1A1)
• 1 x STM32 Nucleo development board (NUCLEO-F401RE / NUCLEO-L476RG / NUCLEO-L073RZ / B-
L475E-IOT01)
• 1x Laptop/PC with Microsoft Windows 7 (or above)
• 1x GPS/GLONASS/Beidou Antenna
• 1x USB type A to Mini-B USB cable