Need help?Do you have a question about the Stabila LAR-100 and is the answer not in the manual?
General| Self-leveling range | ± 5° |
|---|---|
| IP protection class | IP 54 |
| Laser Wavelength | 635 nm |
| Type | Rotary laser |
| Range | 600 ft (diameter) |
| Rotation Speed | 600 rpm |
| Laser class | Class 2 |
| Measuring Range | 600 ft (diameter) |
Lists and describes the main parts of the STABILA LAR-100 rotation laser.
Controls rotation speed, dot/line movement, and scan line length/position.
Instructions on setting up the laser for levelling and initial operation.
How to adjust the laser's height using the clamping screw.
Details the automatic mode with height of tool alert function.
Explains automatic compensation for tremors and alert function.
Describes mode for vibrating surfaces with continuous self-levelling.
How to tilt the unit for marking inclinations over 5°.
Mode for laying out gradients in a specific direction.
Instructions for setting up and aligning the laser for vertical work.
How to transfer a plumbline from floor to ceiling using markings.
How to move the laser plane left or right in point mode.
Method for creating vertical reference areas by swivelling.
Method for measuring right angles and surfaces by swivelling.
Procedure to check horizontal calibration against a wall.
Step-by-step guide to adjust horizontal calibration if tolerances are exceeded.
How to save or discard calibration adjustments.
Procedure to check vertical calibration using two parallel walls.
Step-by-step guide to adjust vertical calibration.
Instructions for replacing batteries in the main unit and remote.
Explains the meaning of different LED combinations and error states.
Safety information regarding laser class and eye exposure.
Guidelines for cleaning and handling the laser unit.
Specifications like output, self-levelling range, accuracy, and operating temperatures.
Details the warranty period and conditions for the product.
To Next Page
