Need help?Do you have a question about the Stabila LAR 160 and is the answer not in the manual?
General| Laser class | 2 |
|---|---|
| Output | 1 mW |
| Laser wavelength | 635 nm |
| Self-levelling range | ± 5° |
| Protection class | IP 54 |
| Automatic Leveling Range | ± 5° |
| Battery Type | AA |
| Type | Rotary laser |
| Power supply | 4 x AA batteries |
Instructions for inserting and replacing batteries, including LED indicator for battery status.
Procedure for switching the laser unit on and its initial self-levelling process.
Details on automatic levelling with tilt function, including LED indicators and interference warnings.
Operation mode for environments with shocks/vibrations, where the unit readjusts itself.
Instructions for manual alignment without automatic levelling or tilt function.
Describes the 360° rotation of the laser beam in horizontal and vertical orientations.
Explanation of how the point laser and rotation plane create a 90° angle for right-angle creation.
Procedure for transferring a determined point from floor to ceiling using the plumb-line laser.
Procedure to verify the horizontal accuracy of the laser unit by marking points on a wall.
Method to check the vertical plumb-line laser accuracy using parallel walls.
To Next Page
