Stabila LAR 350 - User Manual

LAR 350
www.stabila.com
Operating Instructions

Summary

1. Intended Use

2. Safety Information

5. Battery Insertion;Replacement

6. Using the Laser Unit

7. Tilt Function

8.1 Automatic Operation with Tilt Function

8.2 Automatic Operation with Relevelling

Explains automatic operation with relevelling for unstable surfaces.

9.1 Manual Operation with Tilt Function

9.2 Manual Operation without Tilt Function

Describes manual operation where tilt function is deactivated.

12. Operation with Remote Control

14. Line Function in Scan Mode

15. Inclining the Laser Axes

16. Vertical Function and Mode

17. Rotating and Inclining Laser Axes

18. Positioning the Laser Beam

20. Section Mode Operation

21. LED Indicators Explained

22. Checking Accuracy

22.2 Horizontal Accuracy Check

Step-by-step guide to checking the horizontal accuracy of the laser line.

22.3 Horizontal Adjustment

Details how to readjust the horizontal laser axis if accuracy is exceeded.

22.4 Vertical Accuracy Check

Procedure for checking the vertical plumb-line laser accuracy.

22.5 Vertical Adjustment

Explains how to readjust the vertical laser axis if accuracy is exceeded.

Stabila LAR 350 Specifications

General

Laser class	2
Output	< 1 mW
Range with receiver	350 m
Protection class	IP65
Battery type	D 1.5 V
Operating time	80 h
Operating temperature	-10°C to +40°C