Need help?Do you have a question about the Stabila TECH 196 DL Series and is the answer not in the manual?
General| Brand | Stabila |
|---|---|
| Model | TECH 196 DL Series |
| Category | Measuring Instruments |
| Language | English |
Details the equipment and functions of the STABILA TECH 196 DL series.
Identifies and labels the physical parts of the STABILA TECH 196 DL.
Explains the function of each button on the STABILA TECH 196 DL.
Describes the symbols and indicators shown on the STABILA TECH 196 DL display.
Provides instructions on how to insert or replace batteries in the unit.
Details the procedure for powering on the STABILA TECH 196 DL.
Explains how visual cues guide measurements for 0° and 90° angles.
Describes the audio signals used for guidance and confirmation of measurements.
Covers how to select units like degrees, percent, mm/m, and in/ft.
Explains the feature that inverts the display for overhead measurements.
Details how to freeze a measurement using the HOLD function.
Describes setting a custom reference angle for measurements.
Explains how to control the display's backlight.
Details how to lock/unlock the unit's buttons to prevent accidental activation.
Explains how to adjust the automatic shutdown timer.
Provides steps to verify the accuracy of the measuring tool.
Outlines the procedure for calibrating the STABILA TECH 196 DL.
To Next Page
