Stabila TECH 196 DL Series User Manual

13
en
5.5 Locking the measurement with HOLD
The current measurement can be locked by pressing the
"HOLD" button. The visual guidance indicator flashes. The
measurement is displayed continuously.
The locked measurement is deleted by pressing the "HOLD"
button again or switching the unit off.
5.4 Automatic display inversion
The display is inverted for overhead measurements so that
they are always easy to read.

Stabila TECH 196 DL Series Specifications

General

Brand	Stabila
Model	TECH 196 DL Series
Category	Measuring Instruments
Language	English