Need help?Do you have a question about the Stabila LAX 50 and is the answer not in the manual?
Instructions for setting up and using the laser with a tripod.
Steps for levelling using telescopic poles between floor and ceiling.
Procedure to verify the vertical laser line accuracy against a plumbline.
Method to check the horizontal line level accuracy over distance.
Procedure to verify the laser line's inclination and straight projection.
Instructions for setting up and using the laser with a tripod.
Steps for levelling using telescopic poles between floor and ceiling.
Procedure to verify the vertical laser line accuracy against a plumbline.
Method to check the horizontal line level accuracy over distance.
Procedure to verify the laser line's inclination and straight projection.
General| Type | Cross Line Laser |
|---|---|
| Laser Class | 2 |
| Output Power | < 1 mW |
| Laser Wavelength | 635 nm |
| Measurement Range | 50 m |
| Line Straightness | ± 0.3 mm/m |
| Protection Class | IP 54 |
| Battery Type | AA Batteries |
| Operating Time | 20 h |
| Power Supply | 4 x 1.5 V AA |
To Next Page