(4)
The LAX-50 laser
Exit aperture for the horizontal and vertical laser lines
Rough adjustment vial
Clamp
Locking lever for clamp
Base unit
Telescopic poles
Battery compartment cover
Carrying case
en
Operating instructions
The STABILA-LAX-50 is an easy-to-use crossed line laser. It is self-levelling in the
range ± 4.5° and enables levels to be determined quickly and accurately. The verti-
cally and horizontally projected laser lines provide exact alignment / working . The
different parts of this set enable a tripod or a long support pole to be constructed to
suspend the instrument between the floor and the ceiling.
We have endeavoured to explain the unit's handling and functioning in as clear and
comprehensible manner as possible. If, however, you still have any unanswered
questions, we should be pleased to provide advice over the telephone at any time
on the following telephone number:
+49 / 63 46 / 3 09 - 0
Main components
On/off switch
Locking screws
(1)
(3)
(2)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
Securing strap
A
Securing plate
Spring
360° scale
LAX-50.qxd 04.01.2007 15:12 Seite 14