Slide the battery cover (7)
in the direction of the
arrow and insert new
batteries in accordance
with the symbols in the
battery compartment.
Replacing the
batteries
Mignon, AA , LR6
7
3 x 1,5V
alkaline mignoncells,
size AA, LR6
Suitable batteries can also be used.
Do not submerge the laser.
-> The unit is inclined too much
+ is outside the self-levelling range
+ the laser cannot level itself automatically
laser beam
ffllaasshhiinngg
Recycling programme for our EU customers:
In accordance with the WEEE regulations, STABILA provides a disposal
programme for electronic products at the end of their service life. For
more details, please contact: +49 / 6346 / 309-0
Do not store the laser when wet. Dry the
laser and case before putting the laser away.
Tip:
Remove the batteries if the unit will not be used for
a long period!
LAX-50.qxd 04.01.2007 15:13 Seite 18