Stabila LAR 350 - Default Chapter; Table of Contents

LAR 350
2
en
Contents
Section Page
• 1. Intended Use
3
• 2. Safety Information 4
• 3. Before First Use 4
• 4.1 System Elements 5
• 4.2 Remote Control Unit Elements 6
• 5. Battery Insertion/Replacement 7
• 6. Using the Laser Unit 8
• 7. Tilt function 9
• 8.1 Automatic Operation with Tilt Function 10
• 8.2 Automatic Operation with Relevelling 11
• 9.1 Manual Operation with Tilt Function 12
• 9.2 Manual Operation without Tilt Function 13
• 10. Functions 14
• 11. Operation with Remote Control 16
• 12. Settings and Applications 17
• 13. Rotation Function/Rotation Speed 17
• 14. Line Function in Scan Mode 18
• 15. Inclining the Laser Axes 19
• 16.1 Vertical Function 20
• 16.2 Positioning Aid in Vertical Mode 20
• 16.3 Rotating and Inclining the Laser Axes 21
• 17. Positioning the Laser Beam 22
• 18. Displaying the Alignment of the Laser Axes 23
• 19. Standby Mode 23
• 20. Section Mode 24
• 21. LED Indicators 25
• 22.1 Checking Accuracy 26
• 22.2 Horizontal Check 27
• 22.3 Adjustment - Horizontal 28
• 22.4 Vertical Check 29
• 22.5 Adjustment - Vertical 30
• 23 Care and maintenance 31
• 24. Recycling Programme for our EU Customers 31
• 25. Technical Data 31
• 26 Declaration of warranty by STABILA Laser 31