Stack-On FS-14-MB-E - Backup Key and Accessories; Using the Back Up Key; Accessory Installation; Important Information

BACK UP KEY
A "Back Up Key" has been provided in case you have
forgoen or lost your security code. To open the
safe using the back up key follow the steps below:
1. Remove the cover by pressing the tab and turning
the cover as shown in the illustration. e lock can
hang by the connecting cable while unlocking the
safe.
2. Insert the key in the key hole and turn clockwise
1/4 turn (until stopped) in order to unlock the safe.
Rotate the handle and open the door.
3. Keep the door open until you have entered a new
security code. Before entering your new code,
remove the key and screw the cover back in place.
4. Enter your new security code following the
instructions for entering your security code.
SHELVES (Select Models only)
STACK-ON PRODUCTS CO.
P.O. BOX 489, WAUCONDA, IL 60084
IMPORTANT
Keep keys and combination number in a secure place,
away from children. Keep this record of your serial
number and combination in a secure place separate from
your safe. To order a replacement key set, follow the
instructions on the attached form.
e shelves can be installed by locating the shelf clips
to the desired location and seing the shelf in place.
DOOR ORGANIZER ACCESSORIES
(Select Models only)
Your door organizer provides a variety of storage
options for your supplies.
Note: Securely aach the pistol holsters to the back
panel before you holster your pistol. Make sure the
door accessories do not interfere with items in the
safe or when closing the safe door.
TAB
NOTE: e scope stand-o will function properly
for many combinations of guns with scopes.
Screw the scope stand-o into the pilot hole of the
barrel rest.
INSTALLATION OF SCOPE STAND-OFF
(Select Models only)
40249-1312
4
18