LOCKING THE SAFE
TURNING THE KEYPAD SOUND OFF/ON
You can turn o the "Beep" sound of the keypad by
entering the code 6 3 3.
To turn the "Beep" sound on, enter the code 6 6.
To lock the safe, close the door and rotate the
handle counter clockwise until it stops. If the
handle is not turned until it stops, the locking
mechanism will not lock.
NOTE ON LOCKING THE SAFE: Because
the locking mechanism is deactivated for
approximately 3 to 6 seconds aer the
combination is entered, wait a minimum of 6
seconds from the time the combination is entered
to lock the safe.
SELECTING A LOCATION
e safe must be at against the oor and
mounted to the oor. For optimal safety and
security, the safe should be installed adjacent to
a side wall with minimal space on either side of
the safe, in an isolated, dry and secure area.
CHILDREN SHOULD NOT PLAY
WITH OR AROUND THE SAFE AT
ANY TIME.
e safe has a UL Listed interior electrical outlet
that can be connected to an exterior 110V-15A
power source only.
ELECTRICAL OUTLET
Install the exterior power cord into the electrical
outlet in the back of the safe.
NOTE: For easy access, install the power cord
before securing the safe to the oor.
40441-1405
4
24
To Next Page
Loading...
