Stage6 S6 User Manual

S6
INSTRUCTIONS
PRECISION REV COUNTER
EN
Press the button once to switch to the ADJ5 set-up screen, where you can select the
temperature unit. (If both sensors A and B are set to AFR, the instrument will skip
the ADJ5 set-up screen and jump to ADJ6 directly.)
Press and hold the button for 3 seconds to enter the set-up screen.
Press the button to select the unit (°C or °F)
E.g.: The setting is changed from °C to °F.
When you have nished the set-up, press and hold the button for 3 seconds to return
to the ADJ5 set-up screen.
Press the button once to switch to the ADJ6 set-up screen, where you can
set the temperature warning.
Press and hold the button for 3 seconds to enter the temperature A warning set-up.
(If the sensor A is set to AFR, the set-up screen will directly jump to the temperature
B warning set-up screen.)
Press and hold the button for 3 seconds to move to the digit you want to change.
Press the button to change the digit.
E.g.: The temperature warning is changed from 100°C to 105°C.
Press and hold the button for 3 seconds to enter the temperature B warning set-up.
(If the sensor B is set to AFR, the set-up screen will directly jump to the ADJ7 clock set-up screen.)
Press and hold the button for 3 seconds to move to the digit you want to change.
Press the button to change the digit.
E.g.: The temperature warning is changed from 100°C to 205°C.
When you have nished the set-up, press and hold the button for 3 seconds to return to
the ADJ6 set-up screen.
NOTE
Display range:
60–250°C (140–482°F)
Display unit: 1°C (°F)
The setting is
ashing.
The setting is
ashing.
The setting is
ashing.
25

Stage6 S6 Specifications

General

Brand	Stage6
Model	S6
Category	Measuring Instruments
Language	English