Need help?Do you have a question about the Stahlwille MANOSKOP 714 and is the answer not in the manual?
General information on the purpose and benefits of the operating instructions.
Identifies the intended audience and their assumed technical knowledge.
Defines the intended application of the torque and angle wrench.
Provides fundamental safety guidelines for handling the tool.
Details precautions to prevent personal injury during operation.
Outlines measures to prevent damage to the device.
Information on how to transport, what is included in the delivery, and storage conditions.
Lists the key features and technical specifications of the torque and angle wrench.
Details the accuracy standards and calibration certificate provided with the wrench.
Explains the meaning of various symbols and markings found on the device.
Describes the function of the device's display and control buttons.
Explains the direct input method for defining bolting operation parameters.
Details the different operating modes available for the wrench, such as Click, Peak, Track.
Provides detailed technical specifications for different sizes of the torque and angle wrench.
Step-by-step guide for installing the SENSOMASTER software on a PC.
Outlines conditions required before operating the torque and angle wrench.
Instructions on how to insert batteries or rechargeable batteries into the device.
Guidance on choosing the correct inserts and plug-in tools for specific applications.
Procedures for attaching and detaching plug-in tools from the wrench.
Specific instructions for installing a plug-in tool in the standard orientation.
Instructions for installing a plug-in tool in a rotated orientation.
Explains how to measure and set the correct extension length for plug-in tools.
Steps for powering the device on and off.
Describes the automatic taring process that occurs when the device is powered on.
Instructions for performing manual taring of the device.
Provides a general overview of the device's menu structure and navigation.
Details the specific menu structure for direct input operations.
Explains the process and settings for torque measurement.
Explains the process and settings for angle measurement.
Explains the process and settings for combined torque and angle measurement.
Explains the process and settings for combined angle and torque measurement.
Details settings related to alerts, saving data, and communication.
Describes how to access and view saved fastener data.
Explains how to view existing messages and error logs.
Information about the device's firmware and hardware versions.
Instructions on navigating through the device's menu system.
How to enter numerical and other values using the device buttons.
Steps to access the direct input mode for parameter setup.
Instructions for loading and executing pre-programmed bolting sequences.
Steps to access and modify device configuration settings.
How to use the SENSOMASTER software to configure the device.
Guide on physically connecting the device to a computer.
Details the default settings of the torque and angle wrench.
Instructions for changing the device's display language.
How to configure the auto-shutoff feature for power saving.
Steps to enable and configure password protection for the configuration menu.
Procedure for safely disconnecting the device from a computer.
General instructions for operating the torque and angle wrench.
Detailed explanation of how to use the Click function mode.
Detailed explanation of how to use the Track function mode.
Detailed explanation of how to use the Peak function mode.
Instructions for performing controlled tightening in the left-hand direction.
Step-by-step guide for executing a pre-defined sequence plan.
How to manually save recorded bolting data.
Procedure for handling and saving instances of excessive torque application.
Practical application example for torque measurement on wheel bolts.
Practical application example for angle measurement on a timing case cover.
Practical example for cylinder head bolts in a diesel engine.
Practical example for cylinder head bolts in an agricultural machine.
Table detailing malfunctions, their causes, and remedies.
Instructions on how to replace batteries when they are depleted.
Guidelines for cleaning the device safely and effectively.
Overview of maintenance procedures and calibration requirements.
Information regarding the calibration process and intervals.
Lists available inserts for various bolt head types and sizes.
Lists various types of plug-in tools compatible with the wrench.
Details the Li-ion rechargeable battery and its charging accessories.
Lists the perfectControl and Manutork calibration facilities.
Information on software downloads, repairs, and calibration services.
Instructions for proper disposal of the device and its components.
General| Brand | Stahlwille |
|---|---|
| Model | MANOSKOP 714 |
| Category | Power Tool |
| Language | English |
To Next Page