Stahlwille MANOSKOP 730/10 Quick

Need help?

Do you have a question about the Stahlwille MANOSKOP 730/10 Quick and is the answer not in the manual?

Summary

Technical Description

Overview of MANOSKOP 721 and 730 Quick Models

General features and capabilities of the torque wrenches.

Technical Data for MANOSKOP 721 Quick

Technical Data for MANOSKOP 730 Quick

Safety Instructions

Intended Purpose and User Responsibility

Defines correct usage, adherence to instructions, and user responsibility.

Understanding Danger and Damage Notices

Explains the meaning of CAUTION and ATTENTION notices.

Operation Guidelines

Correct Torque Setting Procedures

Essential points for accurate torque setting and avoiding injury.

General Handling and Care

Proper handling and care for the measuring instrument.

Insert Tool Management

Selecting and Attaching Insert Tools (721 Series)

Guidance on selecting and attaching insert tools for MANOSKOP 721 Quick.

Attaching Insert Tools (730 Series)

Tool Operation and Setting

Removing Insert Tools (730 Series)

Steps for removing insert tools from specific MANOSKOP models.

Setting the Torque Level

How to adjust the torque wrench to the desired setting.

Advanced Operation Modes

Counterclockwise Tightening

Performing counterclockwise tightening and model exceptions.

Loosening Nuts and Bolts Safely

Information on loosening operations and potential risks.

Using the Torque Wrench Correctly

Safe Usage Techniques

Proper grip, actuation, and avoiding misuse for safety.

Operation Completion and Readiness

What happens after cut-out and the tool's state for next use.

Maintenance and Accuracy Checks

Accuracy Check Intervals and Requirements

When and how to check the torque wrench's accuracy.

Procedure for Checking Cut-out Value Accuracy

Detailed steps and tools needed to verify accuracy.

Accuracy Verification Procedures

Checking Accuracy at 20% Scale Setting

Performing measurements at 20% of max scale for accuracy.

Checking Accuracy at 60% and 100% Scale Settings

Performing measurements at 60% and max scale for accuracy.

Adjusting Torque Wrench Accuracy

Returning for Professional Adjustment

Option to send the tool for adjustment by STAHLWILLE.

User Self-Adjustment Guide

Instructions for users to adjust the wrench themselves.

Adjustment Details and Cleaning

Detailed Torque Wrench Adjustment Steps

Specific steps for using Allen keys for adjustment.

Cleaning the MANOSKOP

Recommended cleaning agents and methods.

Accessories and Services

Available Accessories for All Models

Inserts for various screw head types for all models.

Specialized Accessories and Services

Insert tools, testers, repairs, and training for service models.

Product Disposal

Guidelines for environmentally responsible disposal of the tool.

The MANOSKOP® 721 and 730 Quick are adjustable torque wrenches designed for controlled tightening of screw joints in a workshop environment. They feature a cut-out, tactile, and audible signal to indicate when the set torque level has been reached. These wrenches are equipped with a safety cut-out mechanism, and the desired torque value is set on a force-free sliding scale with an automatic setting fail-safe mechanism. The measuring element is a flexible rod that is not pretensioned and only comes under tension during the tightening process until the wrench cuts out. After use, it does not need to be reset to the lowest value and is immediately ready for the next job. The ergonomic 2-component grip ensures pleasant and safe handling, with optical and tactile signals indicating the correct grip position.

Technical Specifications:

All models comply with DIN EN ISO 6789, Type II, Class A, with a maximum permissible deviation of ±4% from the set value at cut-out. Each MANOSKOP® comes with a serial number and a works calibration certificate.

MANOSKOP® 721 Quick Series:

721/5 Quick: Range 6-50 N·m (5-36 ft·lb), fixed 10 mm (3/8") square drive, length 338 mm, functional length 293 mm, weight 915 g.
721/15 Quick: Range 30-150 N·m (25-110 ft·lb), fixed 12.5 mm (1/2") square drive, length 415 mm, functional length 387 mm, weight 1310 g.
721/20 Quick & 721QR/20 Quick: Range 40-200 N·m (30-150 ft·lb), fixed 12.5 mm (1/2") square drive, length 483 mm, functional length 418 mm, weight 1490 g (721/20) / 1250 g (721QR/20).
721/30 Quick: Range 60-300 N·m (50-220 ft·lb), push-through 12.5 mm (1/2") square drive (usable from both sides), length 530 mm, functional length 486 mm, weight 1710 g.

MANOSKOP® 730 Quick Series:

These models can be fitted with various insert tools and feature a recessed square drive at the head with a double-sided locating hole and insertion groove.

730/5 & 730a/5: Range 6-50 N·m (5-36 ft·lb), insertable 9x12 mm square drive, length 315 mm, functional length 288 mm, standard extension 17.5 mm, weight 805 g. 730a/5 also includes a range of 50-440 in·lb.
730/10 & 730a/10: Range 20-100 N·m (15-72.5 ft·lb), insertable 9x12 mm square drive, length 370 mm, functional length 343 mm, standard extension 17.5 mm, weight 965 g. 730a/10 also includes a range of 180-880 in·lb.
730/12 & 730a/12: Range 25-130 N·m (20-95 ft·lb), insertable 14x18 mm square drive, length 410 mm, functional length 390 mm, standard extension 25 mm, weight 1100 g. 730a/12 also includes a range of 225-1150 in·lb.
730/20 & 730a/20: Range 40-200 N·m (30-145 ft·lb), insertable 14x18 mm square drive, length 455 mm, functional length 435 mm, standard extension 25 mm, weight 1250 g. 730a/20 also includes a range of 350-1750 in·lb.
730/40: Range 80-400 N·m (60-300 ft·lb), insertable 14x18 mm square drive, length 590 mm, functional length 570 mm, standard extension 25 mm, weight 1880 g.
730/65: Range 130-650 N·m (100-480 ft·lb), insertable 14x18 mm square drive, length 875 mm, functional length 855 mm, standard extension 25 mm, weight 3280 g.
730/11/65: Range 130-650 N·m (100-480 ft·lb), insertable 22x28 mm square drive, length 897 mm, functional length 907 mm, standard extension 55 mm, weight 3280 g.

Usage Features:

Directional Tightening: These wrenches primarily tighten in one direction, indicated by an arrow and the word "CLICK". Counterclockwise tightening is possible by rotating the insert tool 180° for 730 series models or by using the push-through square drive for the MANOSKOP® 721/30 Quick. The MANOSKOP® 721/5, 721/15, and 721/20 Quick models cannot be used for counterclockwise tightening.
Insert Tool Attachment: For 721/5, 721/15, 721/20, 721QR/20 Quick, the ratchet is switched to "R" for clockwise tightening or "L" for uncontrolled loosening. The insert tool slides over the square drive until it locates. For 730 series models, the insert tool is inserted into the internal square drive, pressing down the spring-loaded locking pin until it locates in the hole.
Torque Setting: The torque level is set by moving the sliding scale against a fixed mark. Always approach the desired setting from a lower value. The integrated magnifying glass aids precise positioning. The setting fail-safe mechanism is released by holding down the pressure plate at the grip end, and the value is automatically locked upon release.
Operation: Pull steadily and without interruption until a jerk and click are felt. Do not continue tightening after the cut-out. The wrench is immediately ready for the next job.
Safety: Only use STAHLWILLE plug-in tools. Ensure the plug-in tool's load capability exceeds the torque wrench's capacity. Special tools should only be manufactured in consultation with STAHLWILLE. Always secure plug-in tools with the retaining pin. Avoid using the wrench as a hammer or for uncontrolled loosening of rusty joints, as this can cause damage. Do not overload the tool by more than 25% of the maximum permissible load.

Maintenance Features:

Accuracy Checks: Due to normal wear, the accuracy of the cut-out should be checked regularly. An inspection is recommended after approximately 5000 cut-outs or 12 months, whichever comes first, starting from initial commissioning, in accordance with DIN EN ISO 6789.
Readjustment: If an inspection reveals excessive deviation, the torque wrench must be readjusted. This can be done by STAHLWILLE or by the user, though user adjustment voids STAHLWILLE's accuracy guarantee. Readjustment requires a torque tester and a 2 mm Allen key.
Adjustment Screws: Each MANOSKOP® has two internal adjuster screws accessible through holes in the housing. The screw closer to the handle end adjusts the lower end of the scale range, while the screw closer to the head adjusts the upper end. Turning the Allen key clockwise increases the cut-out torque level, and counterclockwise decreases it.
Cleaning: Clean the MANOSKOP® only with white spirit. Other chemical substances may damage plastic components.
Accessories: STAHLWILLE offers a range of insert tools (ratchet, square, open-jaw, ring, Torx®, bit-holder) and mechanical/electronic torque testers for inspection and readjustment.
Services: STAHLWILLE provides repairs, testing and readjustment (including accuracy guarantee and new works calibration certificate), and training courses. More information is available on their service portal: service.stahlwille.de.
Disposal: When disposing of the tool, observe local environmental protection laws. The handle is made of PPC.