Stahlwille Manoskop 730 User Manual

27
STAHLWILLE
Standard Manoskop
®
721
Service Manoskop
®
730
Technical description
All models
Manoskop
®
721, 730 are adjustable
torque wrenches with a cut-out, tactile
and audible cut-out signals.
• These torque wrenches have a safety
cut-out mechanism.
• The wrench is set to cut-out at a
certain torque level by setting the
required value on the force-free
sliding scale.
• The setting slide has an automatic
setting fail-safe mechanism.
• The measuring element is a flexible
rod. The flexible rod is not
pretensioned so it is only under
tension from the start to the end of the
actual tightening operation until the
wrench cuts out.
List of contents
Technical description.................. 27
ã=Important safety points........... 30
Operation.................................... 32
Maintenance ............................... 42
Cleaning the Manoskop
®
........... 47
Accessories ................................ 48
Disposal...................................... 48

Stahlwille Manoskop 730 Specifications

General

Type	Torque Wrench
Drive Size	1/2 inch
Torque Range (Nm)	40-200 Nm
Torque Range (ft·lb)	30-150 ft·lb
Accuracy	± 4 %