Need help?Do you have a question about the Stahlwille MANOSKOP 721 Quick and is the answer not in the manual?
Describes the general features of MANOSKOP® 721 and 730 Quick torque wrenches.
Details technical specifications for MANOSKOP® 721 Quick models.
Details technical specifications for MANOSKOP® 730 Quick models.
Technical specifications for MANOSKOP® 721/5, 721/15, 721/20, 721QR/20, 721/30 Quick models.
Technical specifications for MANOSKOP® 730/5 to 730/11/65 Quick models.
Defines the proper use of MANOSKOP® 721 and 730 Quick torque wrenches.
Explains CAUTION and ATTENTION notices regarding hazards and damage.
Guidelines for setting and maintaining accurate torque settings.
Instructions on selecting and attaching the correct insert tools to the torque wrench.
Procedure for safely removing insert tools from the torque wrench.
Step-by-step guide to setting the desired torque level on the scale.
Explanation of how to perform counter-clockwise tightening with specific models.
Instructions on how to properly operate the torque wrench for accurate results.
Procedure for checking the cut-out value accuracy of the torque wrench.
Instructions on how to adjust the torque wrench for accuracy deviations.
Recommended cleaning procedures for the MANOSKOP® torque wrench.
Information on available inserts and tools for MANOSKOP® models.
Details on repairs, testing, readjusting, and training courses offered.
Guidelines for environmentally responsible disposal of the torque wrench.
General| Type | Torque Wrench |
|---|---|
| Accuracy | ±3% |
| Material | Steel |
| Drive Size | 1/2" |
| Adjustment | Quick-release |
To Next Page