Need help?Do you have a question about the Stahlwille MANOSKOP 730/20 Quick and is the answer not in the manual?
General features and characteristics common to MANOSKOP® 721 and 730 Quick torque wrenches.
Detailed specifications including range, drive shaft, length, and weight for MANOSKOP® 721 Quick models.
Detailed specifications including range, drive shaft, length, and weight for MANOSKOP® 730 Quick models.
Defines the proper use and limitations of the MANOSKOP® torque wrenches.
Explains the meaning of CAUTION notices for hazardous situations.
Explains the meaning of ATTENTION notices for material or environmental damage.
Important points for accurate and safe torque settings.
Guidelines for treating the torque wrench as a measuring instrument.
Instructions for selecting and attaching insert tools for MANOSKOP 721 Quick models.
Specific steps for attaching insert tools to MANOSKOP 730 Quick models.
Steps for removing insert tools from 730/5 to 730/65 Quick models.
Procedure for setting the desired torque level using the scale and locking mechanism.
How to perform tightening in the counter-clockwise direction for specific models.
Information on loosening nuts and bolts without using the cut-out mechanism.
Step-by-step guide on how to correctly use the torque wrench for tightening.
Procedure for verifying the torque wrench's accuracy using a torque tester and relevant formulas.
Instructions for adjusting the torque wrench's accuracy using internal screws.
Steps for cleaning the MANOSKOP® using white spirit and handling adjustment screws.
List of insert tools and testers for MANOSKOP® models.
Details on repairs, testing, readjusting, and training courses.
Guidance on environmentally responsible disposal of the tool.
General| Type | Torque Wrench |
|---|---|
| Model | 730/20 Quick |
| Accuracy | ±3% |
| Material | Steel |
| Adjustment | QuickRelease |
To Next Page