Stamina AVARI Programmable Stepper - PARTS LIST; Component Identification

PART# PART NAME QTY
øøPARTS LIST
27
1 Main Frame 1
2 Pedal Arm 2
3 Rear Stabilizer 1
4 Upright 1
5 Drive Pulley 1
6 Transmission Pulley 1
7 Magnetic System 1
8 Bearing Housing 2
9 Drive Belt 1
10 Transmission Belt 1
11 Sprocket Hub 2
12 Spacer (ø25 x ø28 x 8.5mm) 2
13 Bolt, Button Head (M8 x 1.25 x 45mm) 8
14 Large Idler Wheel 1
15 Bolt, Button Head (M10 x 1.5 x 25mm) 1
16 Axle 1
17 Key (6 x 6 x 15mm) 1
18 Set Screw (M8 x 1.25 x 12mm) 1
19 Washer (ø12 x ø16 x 1mm thick) 3
20 Thin Nut (3/8” - 26 x 1/8” thick) 1
21 Nut (3/8” - 26) 4
22 Tension Spring (ø20 x ø16 x ø2 x 40mm) 1
23 Idler Arm 1
24 Screw, Flat Head (M5 x 0.8 x 12mm) 2
25 Long Tension Spring (ø20 x ø16 x ø2 x 70mm) 1
26 Idler Arm 1
27 C Ring (19mm) 4
28 Stopper 2
29 C Ring (13mm) 4
30 Nylock Nut (M8 x 1.25) 10
31 Wheel 2
32 Bolt, Button Head (M8 x 1.25 x 35mm) 2
33 Endcap (ø76mm) 2
34 Spacer (ø12 x ø19 x 60.5mm) 4
35 Chain 2
36 Pedal Arm Bushing 16
37 Return Spring 2
38 Spring Connector 2
39 Bolt, Button Head (M10 x 1.5 x 55mm) 2
40 Nylock Nut (M10 x 1.5) 2
41 Spacer (ø10 x ø16 x 40mm) 2
42 Pedal Support Plate 2
43 Bolt, Hex Head (M12 x 1.75 x 85mm) 4
44 Nylock Nut (M12 x 1.75) 4
45 Bolt, Socket Head (M6 x 1 x 20mm) 8
46 Bumper 2
47 Pedal Cap 2
48 Washer (M8) 16