Standard Change-Makers MC200 - User Manual

Summary

Two-Year Limited Product Warranty

1.0 Quick Start Guide

1.7 Troubleshooting An Error Condition On The Dispenser

Guidance on identifying and resolving dispenser error conditions using flash codes.

2.0 INSTALLATION DETAILS

2.1 Cabinet Installation Instructions

5.0 MACHINE AND DEVICE FEATURES

5.1 Bill Acceptance and Bill Security (Feature Type = Device)

Configuration of bill acceptance and security levels for different denominations.

5.2 Fast Vend Shutoff (Feature Type = Machine)

Feature to limit revenue loss by automatically shutting off after a pattern of deposits.

5.3 Error Timeout (Feature Type = Machine and Device)

Allows automatic reset from certain error types after a predetermined time.

5.4 Serial Control (Feature Type = Machine)

5.5 Power Reset (Feature Type = Device)

5.6 Hold Escrow (Feature Type = Machine)

5.7 Dispenser Transfer (Feature Type = Machine)

5.8 Forced Dispense Feature (Feature Type = Machine)

Allows forcing a specific quantity dispense from the Primary Device.

5.9 Forced Dispense Override (Feature Type = Machine)

Ignores Forced Dispense settings under special deposit circumstances.

5.10 Accumulate (Feature Type = Machine)

5.11 Dispenser Type (Feature Type = Device)

5.12 Dispenser Sub Type (Feature Type = Device)

5.13 Stringing Detection Level (Feature Type = Machine)

Sets the sensitivity level for detecting and responding to bill stringing attempts.

5.14 Count Out Items (Feature Type = Device)

5.15 No Bill Acceptor Shutdown (Feature Type = Machine)

5.16 No Coin Acceptor Shutdown (Feature Type = Machine)

5.17 Like Value Override (Feature Type = Machine)

Overrides Make Best Change to dispense the same denomination as the inserted bill.

5.18 Mylar Note Check (Feature Type = Dispenser)

5.19 Overpay Timer (Feature Type = Machine)

Automatically clears an overpay error using the Error Timeout setting.

5.20 Bonus Tokens (Feature Type = Machine)

Awards bonus tokens based on bill denomination, requires Dispenser Type set to Token.

5.21 Dispenser Value (Feature Type = Device)

Sets the value for items dispensed by a dispenser, especially for tokens or tickets.

5.22 Ticket Coast Time (Feature Type = Device)

5.23 Ticket Transfer Factor (Feature Type = Device)

5.24 Tickets Per Notch (Feature Type = Device)

5.25 Bin Low Count Value (Feature Type = Device)

Decreases the number of bills remaining before reporting a bin as sold out.

5.26 Bin Low Override (Feature Type = Device)

Maximizes dispense capacity by disabling sold out detection for specific cassettes.

6.0 TROUBLESHOOTING & MAINTENANCE

6.1 Dispenser Flash Codes

Explanation of flash codes displayed by the status LED for error indication.

6.2 Troubleshooting Chart

A chart to assist in troubleshooting common failures without requiring factory repair.

7.0 BILL DISPENSER

8.0 PART ORDERING INFORMATION

10.0 HOW TO CHANGE A FEATURE SETTING

11.0 APPENDIX - SWITCH SETTINGS FOR ALL FEATURES

Bill Acceptance and;or Bill Acceptance Security Level

Procedure for setting bill acceptance and security levels via switch settings.

Fast Vend Shutoff

Procedure to configure the Fast Vend Shutoff feature for bill denominations.

Error Timeout

Procedure to set the timeout duration for automatic error resets.

Serial Control Level

Power Reset

Hold Escrow

Dispenser Transfer

Forced Dispense Feature

Procedure to set a forced dispense amount based on tens and ones digits.

Forced Dispense Override

Procedure to enable or disable the override for the Forced Dispense feature.

Accumulate Feature

Dispenser Type

Dispenser Sub Type

Stringing Detection Level

Procedure to set the sensitivity for detecting bill stringing attempts.

Count Items Out

No Bill Acceptor Shutdown

No Coin Acceptor Shutdown

Like Value Override

Procedure to override Make Best Change for same-denomination payouts.

Mylar Note Check (Fujitsu bill dispenser)

Overpay Timer

Procedure to set the Overpay Timer for automatic error clearance.

Bonus Tokens

Procedure to configure bonus token awards based on bill denomination.

Dispenser Value

Procedure to set the value for items dispensed by a specific dispenser.

Ticket Coast Time

Ticket Transfer Factor

Tickets Per Notch

Bin Low Count Value

Procedure to set the low count value for bill dispenser bins.

Bin Low Override Feature

Procedure to enable or disable bin low override for maximum dispense capacity.

Standard Change-Makers MC200 Specifications

General

Brand	Standard Change-Makers
Model	MC200
Category	Cash Counters & Coin Sorters
Language	English