Need help?Do you have a question about the Standard Change-Makers MC500 and is the answer not in the manual?
Guidance on selecting an appropriate location for the machine, considering security and access.
Instructions for removing internal restraints to access machine components before operation.
How to safely connect the machine to a power source, recommending dedicated lines.
Steps for filling the coin dispenser with various types of coins.
Guidelines for properly loading bills into the bill dispenser cartridge, emphasizing bill condition.
Procedure for verifying the machine is functioning correctly after setup and loading.
How to identify and resolve dispenser error conditions using flash codes and the status LED.
Steps to reset a dispenser after an error condition has been cleared.
Instructions for accessing and emptying the bill acceptor's collection box.
Guidelines for installing the machine cabinet, referencing a separate manual for specifics.
Procedures for connecting the machine's electrical power, emphasizing proper grounding.
Settings for controlling bill acceptance and security levels for different denominations.
Feature to limit revenue loss by detecting unusual deposit patterns.
Automatic reset feature for certain error conditions after a predetermined time.
Sets the sensitivity for detecting bill stringing attempts to prevent revenue loss.
Sets the value for items dispensed by a specific dispenser or cassette.
Explains how to interpret flash codes displayed by dispenser LEDs to diagnose errors.
A table mapping flash codes to common problems and their potential solutions.
Procedures for routine cleaning and module removal for repair, including tool recommendations.
Specific details and procedures for Fujitsu bill dispensers.
Programming the denomination for each bill dispenser cassette via controller module.
Details the 5-position DIP switches used for programming machine features.
Switch settings for Bill Acceptance and Security Level configuration.
Switch settings for the Fast Vend Shutoff feature, controlling bill quantity and time period.
Switch settings for the Error Timeout feature, managing automatic error resets.
Switch settings for the Stringing Detection Level feature, affecting security against bill manipulation.
Switch settings for the Dispenser Value feature, defining dispensed item values.
General| Brand | Standard Change-Makers |
|---|---|
| Model | MC500 |
| Category | Cash Counters & Coin Sorters |
| Language | English |
To Next Page