Need help?Do you have a question about the Standard Change-Makers MC300 and is the answer not in the manual?
Guidelines for machine positioning, security, and removing internal shipping restraints.
How to test machine operation, interpret status LEDs, and troubleshoot dispenser errors using flash codes.
Procedures for resetting dispensers, removing bills, and emptying coin acceptor boxes.
General guidelines for cabinet installation, location, ADA compliance, base, and wall mounting.
Specific installation requirements for rear load changers, focusing on wall mounting and cabinet support.
Instructions for connecting power, including dedicated lines, surge suppressors, and verification of voltage and polarity.
Setting time periods and max quantities to limit revenue loss from fraudulent bill removal.
Forcing specific coin quantities and overriding forced dispense settings under certain conditions.
Interpreting LED flash codes to diagnose dispenser errors and identify specific problems.
A guide to diagnosing and resolving common machine failures using flash codes and hints.
Detailed switch settings for configuring bill acceptance and security levels for various countries.
Switch settings for configuring the Fast Vend Shutoff feature, including time periods and max bill quantities.
General| Hopper Capacity | 300 coins |
|---|---|
| Dispensing Rate | Up to 1, 200 coins per minute |
| Weight | 12 kg |
| Counting Speed | Up to 1, 200 coins per minute |
| Weight (kg) | 12 |
To Next Page